Occurrence of microplastics in tap and bottled water, and food packaging: A narrative review on current knowledge.

Nowadays, microplastic has been detected in many environmental samples, including aquatic and terrestrial environments. However, few studies recently have addressed their attention to microplastic contamination in different drinking sources and food packages. This review paper has narrated those few findings in brief. Literature showed that different pieces of microplastic fragments, e.g., polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyethylene (PE), high-density polyethylene (HDPE), low-density polyethylene (LDPE), etc. are detected in plastic drinking bottle, tap water, and food packaging containers. Microplastic fragmentation may be associated with mechanical stress, UV radiation, low plastic material quality, aging factor, and atmospheric deposition. Besides these, microplastic is a hub of different chemical compounds and can also retain other complex materials from the surroundings. This makes the microplastic contamination even more complicated and difficult to detect them accurately in a single method. Additionally, one of the common practices at the community level is the long-time repeated usage of plastic drinking bottles and food boxes that subsequently cause microplastic leaching and potential health threats to consumers. This narrative study summarizes the current scenario of microplastic contamination from drinking bottles and food containers and emphasizes doing more quality research in this subtle but highly imposed field to understand potential exposure better.

Exposure and health risks of metals in imported and local brands' lipsticks and eye pencils from Bangladesh.

Elemental contamination in cosmetics is a serious health concern as it can pose a cumulative effect on the user's body over a long period. The prime motive of the study was to assess the concentration of 10 concerning chemical elements (Pb, Cd, Cr, As, Co, Ni, Cu, Zn, Fe, and Mn) in imported and local lipsticks and eye pencil samples collected from retail outlets in central Bangladesh (Dhaka city) and to assess their dynamic health risks for users. A total of 18 lipsticks and 24 eye pencils were studied and concentrations of chemical elements were examined with atomic absorption spectrophotometer. The health risk assessment was performed for dermal and ingestion routes of the contaminants. The results reveal that the concentrations of the examined elements vary with colors, brands, and origins. Pb and As concentrations were found below the permissible limit but Cr concentration in some samples exceeded the allowable limit in cosmetics. Cd was not detected in any samples; however, other examined elements such as Co, Ni, Cu, Mn, Zn, and Fe were detected in considerable concentrations. Elements like Mn, Zn, and Fe were found at high levels. In the case of lipstick samples, elemental concentrations followed the order of Fe > Zn > Mn > Ni > Cr > Cu > Pb > Co > As, while the order was Fe > Cu > Mn > Zn > Ni > Cr > Co > Pb > As for eye pencil samples. Results of the hazards quotient (HQ) indicate that there were no non-carcinogenic or carcinogenic risks of elements in samples for dermal exposure. But the cancer risk values of Cr (HQ > 1 for ingestion) in brown color lipsticks and Ni indicate that lipsticks have some carcinogenic effects if they enter the user's body. Dermal cancer risk for eye pencils has also been calculated and for Pb, Cr, Ni, and As; the values were found within the acceptable ranges of 10-6-10-4. It is suggested that the allowable limit of all toxic elements in cosmetics must be established. Furthermore, continuous monitoring is urgently needed for personal care products like lipsticks and eye pencils commonly available in the local markets in the country like Bangladesh.

Are there plastic particles in my sugar? A pioneering study on the characterization of microplastics in commercial sugars and risk assessment.

Although several studies are confirming the ubiquity of microplastics (MPs) in environments, our knowledge about their effects on human health is still very limited. Therefore, while we have not gathered definitive information on their consequences, studies that aim to identify the MPs sources constitute subsidies to better understand the various exposure pathways to these pollutants. Thus, we investigated the possible presence of MP-like particles in five brands of commercial sugars and two unpacked, unbranded, and unlabeled sugars (hereinafter referred to as "non-branded"), obtained from different supermarkets in Dhaka (Bangladesh). Surprisingly, MPs-like particles were identified in all analyzed samples and taken together, our data demonstrated similar variations (between branded and non-branded samples) in terms of number, size, shape, color, and polymer composition. The number of plastic particles/kg sugar was, on average, 343.7 ± 32.08 (mean ± SEM), having been observed a tendency for a higher frequency of MPs < 300 µm. Overall, microfibers and spherules were the most and the predominant colors of MPs (in general) were black, pink, blue, and brown. The FT-IR analysis confirmed the chemical nature of MPs (in branded and non-branded), having identified nine polymeric types (ABS, PCV, PET, EVA, CA, PTFE, HDPE, PC, and nylon), being ABS and PVC the most frequent. Furthermore, we estimate that sugar consumption in Dhaka City can cause the ingestion of millions of tons of MPs annually (2.4 to 25.6 tons) (with an average of 10.2 tons). Our study is the most comprehensive report on the MP's occurrence in sugar, confirming that the ingestion of this food constitutes an important route of human exposure to these micropollutants and, therefore, serves as a baseline for future assessments and useful for generating efficient strategies to control MPs.

Is there tea complemented with the appealing flavor of microplastics? A pioneering study on plastic pollution in commercially available tea bags in Bangladesh.

Microplastic pollution is a global concern, mainly due to its adverse effects on organisms and ecosystems. However, our knowledge of its impact on humans, in particular, is still very limited. Thus, while we have not gathered definitive information on their consequences, studies that aim to identify the MP's sources constitute subsidies to better understand the various exposure pathways to these pollutants. Thus, we investigated the possible presence of MP-like particles in teabag samples (of different brands) obtained in Dhaka, Bangladesh. Surprisingly, all analyzed samples (five brands) were contaminated with MPs. Fragments and fibers were identified in a higher percentage, and a wide variety of colors was identified, with a predominance of brown, blue, and red colors. Scanning electron microscope images of teabags exhibited net-like structures of fiber particles with a smooth surface. Furthermore, we observed irregularly shaped MPs and rougher surfaces and fragments in the process of detachment from the main fiber, oxidation flakes, and fracture-like. The average size of these pollutants was between 200.6 and 220.7 µm, and the polymer types identified via Fourier-transform infrared spectroscopy (FT-IR) were polytetrafluoroethylene, high-density polyethylene, polycarbonate, nylon, polyvinyl chloride, polytetrafluoroethylene, ethylene-vinyl acetate, cellulose acetate, and acrylonitrile butadiene styrene, the last three being the most frequent in the analyzed samples. Finally, we noticed that MPs from tea bags in Dhaka could cause an average emission of 10.9 million grams of MPs/year. Although the teabags analyzed in our study are not "complemented with the appealing flavor of MPs", it is very likely that tea ingestion in Dhaka is accompanied by the concomitant ingestion of plastic particles making teabags an important route of human exposure to these micropollutants.

Seasonal distributions and risk assessment of polychlorinated biphenyls (PCBs) in the surficial sediments from the Turag River, Dhaka, Bangladesh.

Polychlorinated biphenyls (PCBs) were determined in sediment samples collected from the Turag River, Dhaka city, Bangladesh. This river provides critical ecological services to agriculture, industry, and transportation. However, it is one of the most polluted rivers surrounding the capital city. This study analyzed six PCB congeners (PCB 10, PCB 28, PCB 52, PCB 138, PCB 153, and PCB 180) by GC-ECD at 9 sampling sites in two different seasons. The total concentrations of PCBs in studied samples varied from 344 to 0.217 ng/g dw and 10.6 to 1.68 ng/g dw in Monsoon-season and Dry-season, respectively. The paramount contributor-congener to the total PCBs was PCB 180, and it was found at all the study sites. The ecological risk assessment indicated a high potential risk in the Monsoon-season ([Formula: see text]= 277) and low potential risk in the Dry-season ([Formula: see text]= 25.7). Sediment quality guideline quotients (SQGQs) showed that PCBs in the Monsoon-season would cause "no" or "moderate" biological effects on organisms at every site except site-5 (S5) (high biological effects), while no adverse ecotoxicological effect was observed in the Dry-season. Considering both probable effect level (PEL) and threshold effect level (TEL), the new sediment quality guideline quotient (NSQGQ) showed that in the Dry-season PCB contamination would cause "moderate" biological effects. At the same time, in the Monsoon-season, the findings remained consistent with the findings of SQGQ. This study looked at the PCB contamination scenario in the Turag River sediments for the first time and allowed for a comparison with other rivers worldwide.

Environmental arsenic exposure and its contribution to human diseases, toxicity mechanism and management.

Arsenic is a well-recognized environmental contaminant that occurs naturally through geogenic processes in the aquifer. More than 200 million people around the world are potentially exposed to the elevated level of arsenic mostly from Asia and Latin America. Many adverse health effects including skin diseases (i.e., arsenicosis, hyperkeratosis, pigmentation changes), carcinogenesis, and neurological diseases have been reported due to arsenic exposure. In addition, arsenic has recently been shown to contribute to the onset of non-communicable diseases, such as diabetes mellitus and cardiovascular diseases. The mechanisms involved in arsenic-induced diabetes are pancreatic ß-cell dysfunction and death, impaired insulin secretion, insulin resistance and reduced cellular glucose transport. Whereas, the most proposed mechanisms of arsenic-induced hypertension are oxidative stress, disruption of nitric oxide signaling, altered vascular response to neurotransmitters and impaired vascular muscle calcium (Ca2+) signaling, damage of renal, and interference with the renin-angiotensin system (RAS). However, the contributions of arsenic exposure to non-communicable diseases are complex and multifaceted, and little information is available about the molecular mechanisms involved in arsenic-induced non-communicable diseases and also no suitable therapeutic target identified yet. Therefore, in the future, more basic research is necessary to identify the appropriate therapeutic target for the treatment and management of arsenic-induced non-communicable diseases. Several reports demonstrated that a daily balanced diet with proper nutrient supplements (vitamins, micronutrients, natural antioxidants) has shown effective to reduce the damages caused by arsenic exposure. Arsenic detoxication through natural compounds or nutraceuticals is considered a cost-effective treatment/management and researchers should focus on these alternative options. This review paper explores the scenarios of arsenic contamination in groundwater with an emphasis on public health concerns. It also demonstrated arsenic sources, biogeochemistry, toxicity mechanisms with therapeutic targets, arsenic exposure-related human diseases, and onsets of cardiovascular diseases as well as feasible management options for arsenic toxicity.

Microplastics contamination in the soil from Urban Landfill site, Dhaka, Bangladesh.

Microplastics (MP) pollution has become a matter of global concern because of its several deleterious effects on environmental health, especially on the terrestrial environment. The evidence of MP contamination in terrestrial environment is less explored compared to aquatic bodies. However, in Bangladesh despite having high possibility of MP contamination, there is lacking of available research-based evidence. Urban areas soil is subjected to act as a major environmental reservoir for MPs. Thus, this study was carried out to investigate the presence of MP contamination in constructed landfill sites near Dhaka city, Bangladesh. Ten unmixed soil samples were collected from the Aminbazar Sanitary landfill sites, from that thirty replicated samples were investigated via Fourier Transform Infrared Spectroscopy (FT-IR) analysis and Stereomicroscope. The range of physicochemical parameters were found in the soil samples as follows: moisture content; 15.84%-56.54%; soil pH; 5.76-6.02, electric conductivity; 0.1 µs/cm - 2.43 µs/cm, alkalinity; 6.7 ± 1.528-14.33 ± 0.577, TOC; 0.18% ± 0.02-1.09 ± 0.03. Among the ten samples, 3 samples were identified to have the presence of MP in the form of Low density polyethylene (LDPE), High density polyethylene (HDPE), and Cellulose acetate (CA) respectively. The detection limit ranged from 1 - 2000 µm. Hence, the results show that the procurement and discharge of MPs in the landfills is an overlong process. The results of this study provide an initial evidence and affirm that landfill can be a potential source of MPs. This study indicates that MPs are comparatively overlong outcome of human induced activities which can significantly cause changes in terrestrial ecosystems.